Maintenance And Care - Flex ALi 10,8 Bedienungsanleitung

Switching on the power tool
Switch on the machine:
n Press the switch.
The power tool switch allows the
speed to be increased steplessly
up to maximum.
Switch off the machine:
n Release the switch.
Notes
– The power tool features a brake
which stops the insertion tool as soon
as the switch is released.
– If the power tool is used continuously,
the switch should be fully depressed.
– If the switch is only gently depressed,
the work light comes on.
Working with the power tool
1. Insert battery.
Caution!
Before performing any work on the power
tool, set the direction of rotation selector (5)
to the middle position.
2. Insert tools.
3. Set torque preselection to the required
level (ALi 10,8 only).
4. Set required direction of rotation.
5. Switch on the device.
18
Work light
The product package of the ALi 10,8 drill
driver includes a work light which can
be operated with the second battery.
n Press the button to switch the light
on and off.

Maintenance and care

Cleaning
Danger!
If metals are work over a prolonged period,
conductive dust may become deposited
inside the housing.
Regularly clean the power tool and
ventilation slots. Frequency of cleaning
is dependent on the material and duration
of use.
n Regularly blow out the housing interior
and motor with dry compressed air.
Leave the power tool running.
Charger
Danger!
Before performing any work, pull out the
mains plug. Do not use water or liquid
detergents.
n Remove dirt and dust from the housing
with a paint brush or dry cloth.
ALi 10,8 / ALi 10,8 S