Frequent Problems; Accessories; Article Numbers & Barcodes - BE QUIET! STRAIGHT POWER 80 PLUS Bedienungsanleitung

FREQUENT PROBLEMS:

Problem: The selected voltages (via BIOS) are to low/high
When you check the voltage of the power supply in the BIOS of the mainboard or in the operating system, it is pos-
sible that these are displayed incorrectly. This results from the non-precise dimension of the mainboard and does
not necessarily have to correspond to reality.
With a multimeter (voltage measurement device), the voltage can be determined directly from the power supply ca-
ble. This provides more precise measurement. If the circuits should still lie outside of the tolerance, please contact
our customer service
Problem: After installing a new graphics card, the PC can no longer be turned on or crashes with practically every
opportunity:
You have installed a new higher performance graphics card in your system and now your PC no longer starts or it
seems to crash immediately with the first workload. The power supply is too weakly dimensioned for your graphics
card. Before making a purchase, please take a look at our watt configurator at www.be-quiet.net. Here you'll find the
right be quiet! power supply from our assortment
Important note:
Should the power supply not work, please ensure that you have thoroughly read this instruction manual and can pre-
clude the problem causes listed here. Should the problems continue to exist, please contact our customer service
immediately.
All incoming returns are checked by our RMA service. Should we determine that a power supply is indeed free of
error, it will be sent back to the customer. In addition, an all-included inspection for the occurring expense is levied.
The process for the on-site exchange service in the first year after the purchase is conducted as follows:
As a first step, call the be quiet! hotline for clarifying technical questions and details. A permission for the exchange
will then be granted and initiated thereafter.
What we need from you in this case:
We need a copy of your purchase invoice, and a precise description of the malfunction, both of which can be sent
to us per fax, e-mail or post. After this, you will receive a new power supply from us. When your new power supply is
delivered to your doorstep by a DHL employee, please exchange the defective power supply to be returned to Listan.
Please make sure that the power supply is packaged completely in the cardboard box, including all accessories.
9 . A C C E S S O R I E S
As part of the scope of delivery for the power supply, the following accessories are contained:
• Cooling device cable
• Operating handbook
• Wire ties
• Screws for mounting the power supply
1 0 . A R T I C L E N U M B E R S A N D B A R C O D E S
BN082 - E6-350W BN083 - E6-400W BN084 - E6-450W