Operating Elements; Data Input - Soehnle Style Sense Multi 100 Bedienungsanleitung

A. Operating elements
EN
1. Minus ( )
2. Confirm ( )
3. Plus ( )
Sensor Touch:
Touch keys only slightly!
B. Preparation
1. Insert batteries.
2. For all measurements, place scale on hard,
level surface (not carpet).
3. Cleaning and Care: clean only using slightly
damp cloth. Do not use solvents or abrasives.
Never submerge scale in water.
4. A country-specific option to switch from kg/cm
to lb/in or st/in is possible by pushing the key
on the bottom of the scale to switch units.
Attention! Slipping hazard
in case of wet surface.
C. Data input
1. Push key.
2. Use / keys to select memory slot and con-
firm (Press
3. Place the scale immediately on the floor, wait
until screen displays „0,0" and then step on
the scale.
The initial weighing is indispensable and ser-
ves to store data for later automatic recogniti-
on. If user does not step on the scale, data
cannot be saved and must be entered again.
The first weighing is performed after a user
steps on the scale.
This scale is equipped with a Timeout mode.
It will automatically switch off after approx.
40 seconds, if no keys are pressed.
Data must be entered again after battery
change.
4
key 3 sec.).
D. Weighing
Place scale on hard, level surface and wait
until the scale switches off automatically.
1. Step on the scale. Please stand still.
2. The determined body weight is displayed.
The automatic recognition of persons follows.
3. If the determined values cannot be clearly
allocated to one user, the possible memory
slots will be displayed.
If the determined weight can be allocated to
more than 2 users, other possible memory
slots will be displayed after 3 seconds.
Use the / keys ( = left,
firm the memory slot displayed there.
4. The difference to the last weighing is dis-
played as follows:
At identical weight, +/- 0 is displayed on
white background illumination.
At positive difference (current weight higher
than prior weight) with a plus sign and blue
background illumination.
At negative difference (current weight less
than prior weight) with a minus sign and green
background illumination.
The scale shuts off auto matically.
E. Notifications
1. Replace batteries
2. Overload: max.180 kg
F. Technical data
Max. 180 kg / 100 g
Max. 396 lb / 0.2 lb
Max. 28 st / 0.2 lb
Batteriy requirement: 3 x 1,5 V AAA
= right) to con-