Initial Commissioning; Select Language - Bosch TPA 200 Originalbetriebsanleitung

3.8 Positioning the TPA 200 on the
wheel
The TPA 200 must be held close to the tire valve
(maximum distance of five centimeters) for read-
ing the sensor data. Do not place the TPA 200
on the rim, otherwise the wireless transmission
between the TPA 200 and the sensor can be
disrupted.
OK
Abb. 2: Positioning the TPA 200 on the wheel
Robert Bosch GmbH
Product Description | TPA 200 | 21
4.

Initial Commissioning

4.1

Select language

1. Switch on the TPA 200.
 Main Menu

Check is displayed.
2. Select "Settings" with
with .
 General
3. Select "Language" with
with .
 English
4. Select the desired language with
confirm with
 The selected language is displayed.
5. Select "<Back" twice with
firm with
4.2 Installing TPA Startcenter
1. End all open applications.
2. Insert the CD with "TPA Startcenter" PC
software in the DVD drive.
3. Start "Windows Explorer".
4. Start 'D:\SETUP.EXE' (D = letter for DVD
drive).
 Set-up is started.
5. Select <Install>
6. Heed and follow the instructions on the
screen.
"
Following successful installation the "TPA
Startcenter" application starts automatically.
i
If several users at one PC/laptop want to
read the saved measured values or save new
measured values, each individual user must
install the "TPA Startcenter" software.
is displayed.
or and confirm
is displayed.
or and confirm
is displayed.
.
or
to get into the main menu.
|
1 689 989 200 2014-05-08
en
or and
and con-