Bosch TPA 200 Originalbetriebsanleitung Seite 26

en 26 | TPA 200 | Operation
5.7 Sending everything
The measurement data saved in the TPA 200
can be transferred via Bluetooth or via the USB.
The prerequisite is that the "TPA Startcenter"
software has been started on a PC/laptop. If
the transfer is made via USB, the Bluetooth link
must be deactivated under "SETTINGS >> GEN-
ERAL >> BLUETOOTH".
5.7.1 Transferring measurement data via
Bluetooth to "TPA Startcenter"
i
Searching and displaying Bluetooth devices
(see sec. 5.8.2.).
1. Start the "TPA Startcenter" software.
2. Switch on the TPA 200.

Main Menu is displayed.
 Check
is displayed.
3. Select "Send All Data" with
confirm with .

Bluetooth Activated
 Connecting...
 Saved measurement data is sent to "TPA
Startcenter".

Bluetooth Deactivated
5.7.2 Transferring measurement data via
USB to "TPA Startcenter"
1. Start the "TPA Startcenter" software.
2. Switch on the TPA 200.
3. Connect the TPA 200 to a PC/laptop via the
USB connecting cable.
 The
Charging...
short time on the TPA 200
 After some time there appears on the PC/
laptop the message
ments have been found on the
TPA. Import?
4. Select <Yes>.
 The measured values are imported.
|
1 689 989 200 2014-05-08
or and
is displayed.
is displayed.
is displayed.
message appears for a
Sensor measure-
5.8 Settings
The following settings can be selected.
Function Description
General
Select menu language, specify opera-
tion sequence, delete automatically or
activate and deactivate Bluetooth
Bluetooth Bluetooth devices are found and dis-
played.
Info The software version with the version
date and serial number of the TPA
200 is displayed.
Update The software update can be per-
formed (the update deletes all the
measured values which have been
saved)
5.8.1 General
Language
The menu language can be selected.
Operation sequence
See sec. 5.2.
Deleting automatically
The TPA 200 can save a maximum of 99 mea-
sured values. If the option for Deleting auto-
matically is activated, the first measured value
is deleted automatically as from the hundredth
measured value. If the function is deactivated,
the message appears on the display
Full. Delete all measured values and
continue measuring?
Bluetooth
Bluetooth is always activated as standard. Blue-
tooth must be deactivated in order to transfer
the saved data via the USB connecting cable.
The "Send All Data" menu item is masked out in
the main menu.
5.8.2 Bluetooth
This function enables you to search and display
the Bluetooth devices, which are in the locality.
The Bluetooth device (PC/laptop), on which the
"TPA Startcenter" software is installed, must
then be selected. The saved measured values of
the TPA 200 can then be transferred onto the
PC/laptop from the main menu under "Send
everything".
!
It is mandatory that the Microsoft Bluetooth
driver is used to send the measured values via
Bluetooth from the TPA 200 to the PC/laptop. If
KTS modules and ESI[tronic] 2.0 are used, the
Toshiba Bluetooth driver cannot be used.
Memory
Robert Bosch GmbH