Inhaltsverzeichnis - Benning IT 100 Bedienungsanleitung

Insulation and resistance measuring instrument for:
- Insulation and resistance measurements
- Low resistance measurements
- Resistance measurements
- Continuity testing
- Direct voltage measurements
- Alternating voltage measurements
Contents
1. User notes
2. Safety note
3. Delivery scope
4. Description of appliance tester
5. General information
6. Environmental conditions
7. Electrical specifications
8. Making measurements with the BENNING IT 100
9. Maintenance
1. User notes
These operating instructions are intended for skilled elctricians and trained
electronics personnel.
The BENNING IT 100 is intended for making measurements in dry environment.
It must not be used for making measurements in electric circuits with nominal
voltage greater than 1000 V DC/AC or 600 V DC/AC (for further details, see
Section 6 "Environmental conditions"). The low resistance measuring function
(switch setting  200mA) must not be used in distribution systems with voltages
greater than 600 V.
The following symbols are used in these operating instructions and on the
BENNING IT 100:
Warning of electrical danger!

Indicates instructions which must be followed to avoid danger to
persons.
Important, comply with the documentation!

This symbol indicates that the stipulations in the operating instruc-
tions must be obeyed in order to avoid danger.
This symbol on the BENNING IT 100 means that the BENNING IT 100

is totally insulated (protection class II).
This warning symbol indicates that the BENNING IT 100 in the low
resistance measuring function (switch setting  200 mA) must not
be used in distribution systems with voltages greater than 600 V.
This symbol on the BENNING IT 100 indicates the built-in fuses

(DC) direct current or (AC) alternating current
Earth (voltage to ground)
11/ 2004
Operating instructions
BENNING IT 100
BENNING IT 100

10