Recording A Single Track; Making And Recording A Program - Philips CDR795 Benutzerhandbuch

Recording a single track

You can copy various tracks from different CDs and then
decide either to finalize or not to finalize.
1
Insert a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Play your desired track on the CD player.
3
Press REC to enter the recording menu.
REC TR with the tracknumber and PRESS REC are
displayed alternately.
4
Press REC again to start recording of the track.
is shown, recording starts from the beginning of the
REC
selected track and the actual recording time left starts to
count down.
5
To record further tracks repeat steps 2–4.
When you press / OPEN/CLOSE on the CD recorder
0 0
side,
CD NOT FINAL and PRESS REC TO FINALIZE are
displayed alternately.
Decide now, either
not to finalize: the CDR is not ready to play on other
CD players, however, other tracks or CD text can still
be added.
Press / OPEN/CLOSE on the CD recorder side again or
wait a few seconds.
The drawer is opened.The CDR(W) is not finalized.
or
to finalize: the CDR is ready to play on other
CD players, however, no other tracks or CD text can
be added.
Press REC to start finalizing.
FINAL is displayed and the actual finalizing time
remaining will start to count down.
Internal recording

Making and recording a program

You can make your own program, record it and decide then
either to finalize or not to finalize. However, please note,
that you cannot record a program which contains tracks
from the CD player and CD recorder. In that case
2 DISC PROG and NOT POSSIBLE will be displayed.
1
Load a CDR(W) which is absolutely free of scratches and
dust particles in the CD recorder tray.
2
Load the CD from which you wish to record in the
CD player tray.
3
Select and store all desired tracks from the CD (see
"Programming track numbers").
If the total time of the program is longer than the remaining
0 0
recording time of the CDR(W):
DOES NOT FIT will be displayed briefly.
MISSING and the time that cannot be recorded are
displayed.
If you nevertheless start recording, the recording goes on
until the CDR(W) is full.
4
Press REC to enter the recording menu.
REC PROGRAM? and PRESS REC are displayed
alternately.
5
Press REC again to start recording of the current program.
is shown, recording starts and the actual recording
REC
time left starts to count down.
When you press / OPEN/CLOSE on the CD recorder
0 0
side,
CD NOT FINAL and PRESS REC TO FINALIZE are
displayed alternately.
Decide now, either
not to finalize: the CDR is not ready to play on other
CD players, however, other tracks or CD text can still
be added.
Press / OPEN/CLOSE on the CD recorder side again or
wait a few seconds.
The drawer is opened.The CDR(W) is not finalized.
or
to finalize: the CDR is ready to play on other
CD players, however, no other tracks or CD text can
be added.
Press REC to start finalizing.
FINAL is displayed and the actual finalizing time
remaining will start to count down.
17