C) Display - Reely SKY Exceed Bedienungsanleitung

c) Display

The transmitter has an LC display that shows the most important
information:
1. Transmitter signal icon:
Shows the irradiation of the transmitter signal.
2. Battery icon:
Indicates the condition of the transmitter batteries with four bars.
3. Battery voltage:
Figure 4
Shows the precise battery voltage in volt.
4. Remote control mode:
Indicates the control stick with which the different functions can be controlled.
5. Percentage:
Indicates the set value of the last control stick or trim button operated.
6. GYRO display:
No function is stored for this display.
7. Trim display for the roll function:
This bar displays the current position of the rolling trim.
8. Trim display for nod function:
This bar displays the current position of the nod trim.
9. Trim display for the pitch function:
No function is stored for this display.
10. Trim display for the tail function:
This bar displays the current position of the tail trim.
11. Display of the adjustable functions in the programming menu:
For further information on these displayed values, see the section „Programming the Remote Control Transmitter".
43