Frequently Asked Questions (Faqs) - Marmitek TV Anywhere Wireless HD Gebrauchsanleitung

Audio
Supported audio
Infrared return function
Frequency range
Environment
Ambient temperature
Humidity
Power supply
External power adapter
Specifications may change without prior notice.
7

Frequently asked questions (FAQs)

Tip: Testing over a long distance is difficult. First, place the HD transmitter and the HD
receiver in the same room (minimum 2 metres apart) to test if everything works and
only then place the HD receiver in another room.
No (or poor) image and sound on TV or projector
Ensure that the ON/OFF switches at the back of the transmitter and receiver are
x
in the ''ON'' position.
Ensure that all HDMI cables are connected properly or replace them.
x
Ensure that all 3 LEDs on both the HD transmitter and the HD receiver are lit.
x
Ensure that the HDMI source is turned ON and the correct HDMI input is selected
x
on the TV.
Ensure that the HDMI source is set to a correct video resolution
x
(480p, 576p, 720p, 1080i or 1080p). If necessary, consult the user manual of your
HDMI source.
Disconnect the power adapters from the wall socket and reconnect them to reboot
x
the TV Anywhere Wireless HD.
No or bad connection between the HD transmitter and HD receiver
Move the HD transmitter and/or the HD receiver from the immediate vicinity
x
of the connected HDMI sources and Wi-Fi equipment. These may affect the
range.
Slightly adjusting the position of the HD transmitter and/or HD receiver may
x
already help out.
Too much distance between HD transmitter and HD receiver. Try using shorter
x
distances.
Disconnect the power adapters from the wall socket and reconnect them to reboot
x
the TV Anywhere Wireless HD.
16
2CH PCM stereo
30 ~ 60kHz
0 ~ 40° C
20% ~ 90%
100-240VAC @50-60Hz, 5VDC @ 2A
© MARMITEK