Cleaning; Maintenance Intervals; Maintenance Interval Table - FLORABEST FKS 2200 D2 Betriebsanleitung

Cleaning

• Clean the machine thoroughly after
every use. In this way, you extend the
life of the machine and avoid acci-
dents.
• Keep the gripping handles free of pet-
rol, oil or grease. Clean the gripping
handles, where appropriate, with a
moist cloth soaked in soap. Use no sol-
vents or petrol for cleaning!
• Clean the saw chain after every use.
Use a paint brush or wipe for that. Do
not use any liquids to clean the chain.
After cleaning, oil the chain lightly with
chain oil.

Maintenance Interval Table

Machine part
Components of the chain
brake
Sprocket chain wheel
Saw chain (5)
Guide bar (4)
Action
Check, replace if required
Check, replace if required
Check oil, regrind or re-
place if required
Check, turn round, clean
and oil
• When cleaning, also remove the chain
wheel cover (15) so that this area can
be cleaned as well.
• Clean the ventilation slots and the
surfaces of the machine with a paint
brush, whisk or dry cloth. Do not use
any liquids for cleaning.

Maintenance intervals

Regularly carry out the maintenance opera-
tions listed in the following table. The life
of the saw is extended by regular main-
tenance of your chainsaw. Furthermore,
you get optimum cutting performance and
avoid accidents.
Before
every
use




GB IE CY
After 10 hours
of operation

19