mainly suck in dust, then you need to in-
stall the fine dust filter attachment set
(already integrated into 1.183-901.0).
– This device has been designed to
sweep dirt and debris from outdoor sur-
faces.
– The machine is not suitable for vacuum-
ing dust which endangers health.
– The machine may not be modified.
– Never vacuum up explosive liquids,
combustible gases or undiluted acids
and solvents! This includes petrol, paint
1 Drawbar
2 Storage compartment
3 Kerb access help (option) *
4 Cover
5 Waste container
6 Suction head
7 Handle for filter cleaner (optional; fine
dust filter attachment set) *
8 Brake spring
9 Freewheel lever
10 Battery
11 Fuel tank
12 Tank lid
13 Fuel tap
14 Coarse filter (optional, fine dust filter at-
tachment set) *
15 Beacon light (optional) *
16 Blower pipe (optional, leaf blower at-
tachment set)
14
English
thinner or heating oil which can gener-
ate explosive fumes or mixtures upon
contact with the suction air. Acetone,
undiluted acids and solvents must also
be avoided as they can harm the mate-
rials on the machine.
Reactive metal dusts (for e.g. alumini-
um, magnesium, zinc) can form explo-
sive gases when they come in contact
with highly alkaline or acidic detergents.
– Do not vacuum up any burning or glow-
ing objects.
Operating and Functional Elements
17 Suction pipe
18 Handle
19 Bulk waste flap
20 Suction hose
21 Exhaust openings for vacuuming
22 Tool holder (for brooms, shovel,...)
23 Hood support
24 Storage compartment for 5 -litre reserve
can (LxBxH: 165x147x247 mm)
25 Unlock/ Brake
26 Gas lever
27 Ignition lock
28 Fuse of electric starter, 15 A (on the
rear)
29 Handle for device hood
30 Choke
31 Operating hour counter
* Included in the scope of delivery with
1.183-901.0
– The machine may only be operated on
the surfaces approved by the company
or its authorised representatives.
– The machine may not be used or stored
in hazardous areas. It is not allowed to
use the appliance in hazardous loca-
tions.
– The following applies in general: Keep
highly-flammable substances away
from the appliance (danger of explo-
sion/fire).
Before Commissioning
Unloading
Warning
Do not use a forklift truck to unload the ma-
chine as this may damage it.
To unload the machine, proceed as follows:
Cut plastic packing belt and remove foil.
Remove the elastic tape fasteners at
the stop points.
Remove the front wheel lock.
Freewheel lever for moving the appli-
ance without adjusting self-drive (see
below).
Drive the device forward from the pal-
ette.
Tilt the suction head upward.
Close the waste container lid.