Gude 50119 Originalbetriebsanleitung Seite 12

Warranty
A warranty period of 12 months applies to commercial
use and 24 months apply to private use and commences
on the day of purchase of the device.
Warranty applies exclusively to failures due to defective
material or workmanship. An original sale slip with
indication of date of sale must be presented in case of
claiming for the warranty rights.
Warranty does not cover unprofessional use such as
device overload, violent use, damage caused by third
party or foreign materials, failure to comply with
operations and assembly manual, and normal wear and
tear.
General Safety Instructions
It is necessary to read these operating instructions before
first use of the machine. If there are any doubts as far as
machine connection and handling are connected please
contact the manufacturer (servicing department).
IN ORDER TO ENSURE HIGH SAFETY LEVEL
PLEASE FOLLOW THESE INSTRUCTIONS
CAREFULLY:
Attention: Operate with current protector only!
ATTENTION!
• Keep your workplace clean and tidy. Disorder at
the workplace and on the work-table increases risk
of accident and injury.
•
Pay attention to conditions of environment you
are working in. Do not use electric tools and
devices in a humid or wet environment. Ensure
sufficient lighting. Do not expose electric tools to rain
or high air humidity. Do not switch the electric tools
on in environments with flammable liquids or
inflammable gases.
•
Do not allow unauthorised persons to get to the
machine. Keep visitors and spectators, especially
children and handicapped persons, in a safety
distance from your workplace.
• Ensure safe storage of tools. Tools and equipment
you do not need must be stored at an elevated
place, if possible, so that they were not accessible to
unauthorised persons.
•
Always use correct equipment for all works.
Do not use e.g. small tools or accessories for works
that need to be executed by heavy equipment. Use
tools solely for purposes for which they have been
designed. Do not overburden the device!
•
Pay attention to the electric cable.
Do not pull the cable. Pull the connector plug only
when pulling out of socket. Protect the cable against
heat sources, oil and sharp edges.
•
Prevent from unintentional switching on.
Make always sure the switch on the device was in
the off position before connector plug is plugged in.
•
Use special extension cables at outdoor works.
For outdoor works you need special extension
cables suitable for such works and with appropriate
marking.
•
Stay concentrated at all times. Pay attention to
what you are doing.
Use common sense. Do not use the electric equipment when
you are tired.
•
Pay attention to damaged parts. Check the device before
use. Are any parts damaged? In case of small damage
please consider whether the device is really capable of
perfect and safe working.
•
Protect yourself against electric shocks.
Prevent any contact of your body with earthed objects, e.g.
water piping, heating elements, cookers and fridges.
• Use approved parts only. Always use only identical spare
parts at maintenance and repairs. Spare parts are available
in an authorised service centre.
•
Warning!
Any use of accessories and extensions not explicitly
recommended in these operating instructions may result in a
threat to persons and objects.
Safety Instructions for First Putting the Machine into
Operation
• The appliance meets EN 61000-3-11 requirements and is
subject to special connection conditions. That means that use
on optionally selected connection points is inadmissible.
•
The appliance can lead to occasional voltage fluctuations
under unfavourable power conditions.
•
The appliance is only designated to be used for connection
points not exceeding the maximum allowed impedance of
Z = 0,233 .
max
• As a user, you must make sure your connection point on
which you want to use the appliance meets the above-
mentioned requirements – after agreement with your
electricity supplier if necessary.
Caution! To be used with RCD (safety switch against
stray current) only!
Caution! The compressor may only be used with
appropriate wheels and Steering wheel.
Caution! Never switch the compressor on or off using
the plug. Pressure switch to be pressed at all times.
•
The compressor must not be fitted in a vehicle for
industrial purposes without an inspection by an expert!
•
If the compressor is used for industrial purposes, it
must be checked by an expert before putting into
operation for the first time. Such check must be ordered
by the operator (under BetrSichV Section 17 No. 25 –
operation safety regulation).
Caution! When fitted in automatic equipment, it is
necessary to install appropriate alarm or warning
devices in case of power outage or malfunction or
compressor (e.g. feed line, etc.) failure.
Never keep the air flow in body holes as that could lead
to fatal injuries!
Caution! The pneumatic hose may lash you when the
quick-acting coupling is opened! The pneumatic hose
should be held by hand.
At the end of your working day, switch the appliance off,
release the air jet and unplug the compressor. Do not
leave the compressor on over night as it could become
a source of danger.
Never use the compressor without being supervised.
•
Unplug the appliance before an adjustment or servicing.
•
Children must not use the appliance.
12