Configuration Menus - Silvercrest SFB 10.1 C3 Bedienungsanleitung

SilverCrest SFB 10.1 C3

Configuration menus

Press and hold the
default sub-menu is "LANGUAGE". To program the remote control
according to your needs, use the
sub-menu you want or press
the button to open the selected sub-menu.
If no entry is made for 30 seconds in setup mode, the
remote
If necessary, start programming again.
Make your selection and then press
programming. The display reads "SUCCESS". The new settings are
stored for the device currently selected providing no other device was
selected while programming.
The following settings can be made in the "CONFIGURE" menu:

Programming of devices you want to control
10 - English
Executes a macro when used together with one of the
number buttons 1 to 6.
Mutes or restores the sound output (MUTE).
Confirms a menu item in the remote control
"CONFIGURE" menu or in the menu of the selected
device.
Menu navigation: move up
Menu navigation: move down
Menu navigation: move left
Menu navigation: move right
Increase/decrease volume
1. TV mode: Next / previous channel
2. CD/DVD mode: SKIP function
AV input selection for the selected device
Use this button to enter two-digit channel numbers. This
function depends on the selected device. To enter a two-
digit channel number, first press the
then enter the channel number. Pressing the
button again allows you to enter a single-digit channel
number.
Toggles the remote control light on/off.
button for 3 seconds to open the menu. The
control
buttons to navigate to the
to return to the start window. Press
returns to
button and
the start window.
to confirm and finish