Installing The Detector Associated With The Tkp100A Coviva Controller - hager TG551A 3 Montageanleitung

2.3. Installing the detector associated with the TKP100A coviva controller

All detectors must be learned and within range
radio of the coviva controller.
1. Tap the application home page coviva on the
blue "+" button on the "add page a detector"
and select "Add one peripheral".
2. Press "Go On", and press key held down on the
CFG2 key until the application displays a
message from confirmation.
3. Continue with chapter 3. Testing the detector.
Principle of networking with the coviva controller
Radio networking
of all detectors.
All detectors must be
learned and within
range of radio of the
coviva controller.
Smoke detector (ex.: TG551A)
Network detector (ex.: TG550A)
coviva
controller
Network
Radio relay
with different
models.
Network 1 Network 2
coviva
controller
97