asmodus MINIKIN 155W BOOST Bedienungsanleitung Seite 46

Using the Device
Inverting the Display Color
Checking/setting the Resistance
To check or set the resistance of the evaporator head, press and hold the "-" button while the device is switched on
and then press the Fire button. If the resistance is correct, confirm "YES" by pressing the Fire button. If you would like
to change the resistance value, press the "+" button to navigate to "NO". Press the Fire button and then change the
value by pressing the "+" or "-" button. Press the Fire button to confirm the value and to end the process.
Note : Make sure that the evaporator head is cold before confirming or setting the resistance value. Otherwise, the
device may not work, or at least improperly.
Access the Color Change menu by pressing the Fire button rapidly 8 times while the device
is switched on. Press the "+" or "-" button to invert the display color. Use the Fire button to
navigate to the Exit menu. Press the "+" or "-" button to go back to the main interface.
44