Emergency Procedure - Holzmann KAP 305JL Betriebsanleitung

Use only saw blades that are suitable for the use with the KAP machine, especially
regarding technical parameters and which are tested and comply with the directive
EN 847-1.
Deflected, defect or worn saw blades have to be replaced immediately.
Blunt saw blades have to be sharpened or replaced.
Blunt saw blades highly increase the danger of kickback!
Assure yourself that the saw blade is correctly mounted and does not touch the
base plate.
Do not stop the saw blade by touching it on the side. This will ruin the drive
mechanism.
Do not manipulate or remove the saw blade protecting cover!
Do not fix small workpieces by hand, instead only use the downholder (10).
No material feed, no material removal, no adjustments or other activities when
saw blade is running.
Do not position your hands near the saw blade or in a way that they could slip into
the cutting line.
Long workpieces have to be supported by the double bar guide.
Take especially care when cutting round workpieces!
Check the workpiece for nails, clamps and other material!
Just cut one workpiece at once. Do not stack or attempt to cut several work-pieces
in one cutting operation!
Do not cut firewood
Wear gloves when handling the saw blades and rough materials. It is
recommended that saw blades, whenever practicable be carried in a container.
Make sure that the speed indicated on the saw blade is at least as high as that on
the saw speed specified.
Be sure to use only those spacers and screw rings, which are suitable for the
purpose specified by the manufacturer.
No Reload, remove or adjust workpieces, or material remains with the machine
running!
Do not place hands in near circular saw blade or in a position where they could slip
direction circular saw blade!
The use of other application tools and other accessories can mean a risk of
personal injury.
Let your power tool repaired by a qualified electrician
The machine does not require extensive maintenance. If malfunctions and defects
occur, let it be serviced by trained persons only.
A first aid kit in accordance with DIN 13164 should always be readily
available for a possible accident. Initiate the violation in accordance with
the necessary first aid measures. When requesting support, provide the
following details:
1. Place of accident
3. Number of injured people
HOLZMANN Maschinen GmbH
KAP 305JL
www.holzmann-maschinen.at
N O T I C E

Emergency procedure

2. Type of accident
4. Injury type(s)
SAFETY
38