Basic operations
Recording a video clip
1.
Adjust the focus:
Normally the camcorder can auto focus without adjusting focus. If you want to take closeup
pictures, you can push the Joystick button down to switch to Macro mode (
2.
AF:
When recording in one spot without zooming in / zooming out or moving around, you can
activate the AF lock function by moving the Joystick up. To disable this function, move the
Joystick up again.
3.
Press the
Record button (
4.
Use the
Zoom buttons (
5.
Use the Joystick Right to Pause, and Left to resume.
6.
Press the
Record button (
Taking a still picture
1.
Adjust the focus:
Normally the camcorder can auto focus without adjusting
focus. If you want to take closeup pictures, you can push the
Joystick button down to switch to Macro mode (
2.
AF:
When recording in one spot without zooming in / zooming out or moving around, you can
activate the AF lock function by moving the Joystick up. To disable this function, move the
Joystick up again.
3.
Zooming:
Move the Zoom button (
4.
For better image quality, it is recommended that you hold the LCD panel steadily to avoid the
image from blurring caused by hand shake.
5.
Press the
Shutter button (
yellow to auto focus. When the focus frame turns green, press the
button fully down to take a still picture.
Recording an audio clip
1.
Enter
Voice mode.
2.
Press the
Record button (
3.
Use the Joystick Right to Pause, and Left to resume.
4.
Press the
Record button (
) to start recording.
/
) to zoom in or zoom out the screen.
) again to stop recording.
/
) up or down to zoom in or zoom out the screen.
) half way down, focus frame turns
) to start recording.
) again to stop recording.
7
).
).
80cm ~
1cm ~ 80cm
Focus frame