Upgrading Software - Samsung HT-J7500W Benutzerhandbuch

Settings
Settings
Wi-Fi Direct
Device Name : [HTS]J7500W
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX
5. You have three ways to complete the Wi-Fi
connection:
~ Through the Wi-Fi device.
~ Through the product using PBC.
~ Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1. On the Wi-Fi device, follow the device's
procedure for connecting to another Wi-Fi
Direct device. See the device's user manual for
instructions.
2. When you have completed the procedure, you
should see a pop-up on your TV screen saying
that a device that supports Wi-Fi Direct has
requested to connect. Select OK, and then
press the OK button to accept.
3. The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed as connected on
the Wi-Fi Direct screen.
~ The PBC and PIN procedures connect devices
automatically.
Through the Product Using PBC
1. Select the Wi-Fi Direct device you want to
connect to this product, and then press the
button.
2. The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed as connected on
the Wi-Fi Direct screen.
Through the Product Using a PIN
1. Select the Wi-Fi Direct device you want to
connect to this product, and then press the
button.
Disconnected
Refresh
Close
OK
OK
26
- English
2. The PIN pop-up appears.
3. Note the PIN code in the pop-up, and then enter
it into the appropriate field in the Wi-Fi Direct
device you want to connect.
4. The Connecting pop-up appears, followed by
the Connected pop-up. When it closes, you
should see the device listed as connected on
the Wi-Fi Direct screen.
✎
The current wired or wireless network connection
will be disconnected when you use the Wi-Fi
Direct function.
✎
Text files, such as files with a .TXT or .DOC
extension, will not display when you are using the
Wi-Fi Direct function.

Upgrading Software

The Software Update menu allows you to upgrade
the product's software for performance improvements
or additional services.
~ Never turn the product off or back on manually
during the update process.
1. In the Home menu, select Settings, and then
press the OK button.
2. Select Support, and then press the
3. Select Software Update, and then press the
OK button.
4. To download update software and update now,
select Update now, and then press the
button. See "Update now" on the next page for
details.
5. To let the product download update software
automatically when available, select Auto
update, and then press the
page 27)
✎
The upgrade is complete when the product turns
off, and then turns on again by itself.
✎
Samsung Electronics takes no legal responsibility
for product malfunction caused by an unstable
Internet connection or consumer negligence
during a software upgrade.
✎
If you want to cancel the upgrade while the
upgrade software is downloading, press the
button.
✎
When a system upgrade is in progress, "UPDATE"
is displayed on the front panel.
OK button.
OK
OK button. (See
OK