Samsung HT-J7500W Benutzerhandbuch Seite 24

Settings
6. Repeat Steps 4 and 5 until you have filled in all
parameters.
✎
You can get the network parameter values from
your Internet provider.
7. When finished entering all the parameter values,
select OK, and then press the
home cinema verifies the network connection
and then connects to the network.
Wireless Network
You can set up a wireless network connection in three
ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
Before you configure the wireless network
connection, disconnect any wireless network devices
currently connected to the product or, if applicable,
the product's current wired connection.
K
Wireless - Automatic
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 23:
1. In the Network Settings screen, change
Network type to Wireless. The product
searches for and then displays a list of the
available networks.
Network Settings
Select your network type.
Network type Wireless
Wireless network
si-ap
iptime
KIMING_VTOWER
Refresh WPS(PBC)
2. Select the desired network, and then press the
OK button.
3. On the Security screen, enter your network's
security code or pass phrase.
Enter letters by selecting a letter with 78:;
buttons, and then pressing
4.
✎
OK button. The
K
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the
Network Settings values manually.
After following Steps 1 to 3 in "Configuring Your
Network Connection" on page 23:
1.
2.
3.
4.
You can connect your Blu-
ray player to the internet.
Please select which wireless
5.
network to use.
OK button.
24
- English
When finished, select Done, and then press the
OK button. The product verifies the network
connection and then connects to the network.
You should be able to find the security code or
pass phrase on one of the set up screens you
used to set up your router or modem.
Wireless - Manual
In the Network Settings screen, change
Network type to Wireless. The product
searches for and then displays a list of the
available networks.
Scroll through the list, select the desired network
or Add Network, and then press the
If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
Enter your wireless network or wireless router's
name.
~ Enter letters by selecting a letter with the
78:; buttons, and then pressing the
button.
~ To display capital letters (or redisplay lower
case letters if capital letters are displayed),
select , and then press the
~ To display symbols and punctuation, select
123#&, and then press the
redisplay letters, select 123#&, and then press
the OK button.
When finished, select Done, and then press the
OK button.
On the Security type screen that appears,
use the ,. buttons to select the network's
Security type, and then press the
On the next screen, enter your network's
security code or pass phrase.
~ Enter letters by selecting a letter with the
78:; buttons, and then pressing the
button.
When finished, select Done, and then press
the OK button. The product searches for the
network.
OK button.
OK
OK button.
OK button. To
OK button.
OK