Upgrading Software - Samsung HT-F5500 Handbuch

Wi-Fi Direct
Device Name : [HTS]-F5500
Select your Wi-Fi Direct device to connect to.
AndroidXXXXXXX
5. You have three ways to complete the Wi-Fi
connection:
• Through the Wi-Fi device.
• Through the product using PBC.
• Through the product using a PIN.
Each is covered below.
Through the Wi-Fi Device
1. On the Wi-Fi device, follow the device's procedure
for connecting to another Wi-Fi Direct device. See
the device's user manual for instructions.
2. When you have completed the procedure, you
should see a pop-up on your TV screen saying that
a device that supports Wi-Fi Direct has requested to
connect. Select OK, and then press the E button
to accept.
3. The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
• The PBC and PIN procedures connect devices
automatically.
Through the Product Using PBC
1. Select the Wi-Fi Direct device you want to connect
to this product, and then press the E button.
2. The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
Through the Product Using a PIN
1. Select the Wi-Fi Direct device you want to connect
to this product, and then press the E button.
2. The PIN pop-up appears.
Disconnected
Refresh
Close
3. Note the PIN code in the pop-up, and then enter it
into the appropriate field in the Wi-Fi Direct device
you want to connect.
4. The Connecting pop-up appears, followed by the
Connected pop-up. When it closes, you should
see the device listed on the Wi-Fi Direct screen as
connected.
| NOTES |
\
The current wired or wireless network connection
will be disconnected when you use the Wi-Fi Direct
function.
\
Text files, such as files with a .TXT or .DOC extension,
will not display when you are using the Wi-Fi Direct
function.

Upgrading Software

The Software Update menu allows you to upgrade the
product's software for performance improvements or
additional services.
• Never turn the product off or back on manually
during the update process.
1. In the Home menu, select Settings, and then press
the E button.
Select Support, and then press the E button.
2.
Select Software Update, and then press the E
3.
button.
4. To download update software and update now,
select Update now, and then press the E button.
See "Update now" on the next page for details.
5. To let the product download update software
automatically when available, select Auto update,
and then press the E button. See "Auto update"
on the next page for details.
| NOTES |
\
The upgrade is complete when the product turns off,
and then turns on again by itself.
\
Samsung Electronics takes no legal responsibility for
product malfunction caused by an unstable Internet
connection or consumer negligence during a software
upgrade.
\
If you want to cancel the upgrade while the upgrade
software is downloading, press the E button.
\
When a system upgrade is progress, "UPDATE" is
displayed on the front panel.
27
|
English