3.
Select the IP setting field, and then set it to Enter
manually.
4.
Select a value to enter (IP Address, for example),
and then press E. Use the number keypad on
your remote control to enter the numbers for the
value. You can also enter numbers using the ▲▼
buttons. Use the ◄► buttons on the remote control
to move from entry field to entry field within a value.
When done with one value, press the E button.
5.
Press the ▲ or ▼ button to move to another value,
and then enter the numbers for that value following
the instructions in Step 4.
6.
Repeat Steps 4 and 5 until you have filled in all
values.
| NOTES |
\
You can get the Network values from your Internet
provider.
7.
When finished entering all the values, select OK,
and then press the E button. The home cinema
verifies the network connection and then connects
to the network.
Wireless Network
You can setup a wireless network connection in three
ways:
- Wireless Automatic
- Wireless Manual
- WPS(PBC)
Before you configure the wireless network connection,
disconnect any wireless network device currently
connected to the product or, if applicable, the product's
current wired connection.
K
Wireless - Automatic
After following Steps 1 to 3 in "Configuring Your Network
Connection" on page 24:
1.
In the Network Settings screen, change Network
type to Wireless. Then, select Connect and press
the E button.
The product searches for and then displays a list of
the available networks.
Network Settings
Select your network type.
Network type
Wireless
Wireless network
si-ap
iptime
iptime5G
KIMING_VTOWER
TIAS
Refresh
WPS(PBC)
You can connect your Blu-ray
player to the internet. Please
select which wireless network to
use.
Select the desired network, and then press the E
2.
button.
3.
On the Security screen, enter your network's
security code or pass phrase.
Enter numbers directly using the number buttons
on your remote control. Enter letters by selecting a
letter with ▲▼◄► buttons, and then pressing E
button.
4.
When finished, select the Done, and then press
the E button. The product verifies the network
connection and then connects to the network.
| NOTES |
\
You should be able to find the security code or pass
phrase on one of the set up screens you used to set
up your router or modem.
K
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set the Network
Settings values manually.
After following Steps 1 to 3 in "Configuring Your Network
Connection" on page 24:
1.
In the Network Settings screen, change Network
type to Wireless. Then, select Connect and press
the E button.
The product searches for and then displays a list of
the available networks.
2.
Scroll through the list, select the desired network or
Add Network, and then press the E button.
3.
If you selected a network in Step 2, go to Step 6.
If you selected Add Network, go to Step 4.
4.
Enter your wireless network or wireless router's
name.
• Enter numbers directly using the number buttons
on your remote control.
• Enter letters by selecting a letter with the ▲▼◄►
buttons, and then pressing the E button.
• To display capital letters (or redisplay small letters
if capital letters are displayed), select
then press the E button.
• To display symbols and punctuation, select
123#&, and then press the E button. To
redisplay letters, select 123#&, and then press
the E button.
When finished, select Done, and then press the E
button.
, and
25
|
English