Options - Zanussi ZWT 3205 Benutzerinformation

Programmes
Standard 60 °C cotton
Standard 40 °C cotton
1) At the end of spin phase.
Off Mode (W)
The information given in the chart above are in compliance with the EU Commission regulation
1015/2010 implementing directive 2009/125/EC.

Options

Temperature
With this option you can change the default
temperature.
Indicator = cold water.
The indicator of the set temperature comes on.
Spin
With this option you can change the default
spin speed.
The indicator of the set speed comes on.
Additional spin options:
No Spin
• Set this option to deactivate all spin phases.
Only the drain phase is available.
• The related indicator comes on.
• Set this option for very delicate fabrics.
• The rinses phase uses more water for some
washing programmes.
Rinse Hold
• Set this option to prevent the laundry
creases.
• The related indicator comes on.
• There is a water in the drum when the
programme is completed.
• The drum turns regularly to prevent the
laundry creases.
8
Load Energy
(kg) consump-
tion (kWh)
3 0,69
3 0,59
0,48
Water con- Approxi-
sumption mate pro-
(litre) gramme
duration
(minutes)
41
41
Left On Mode (W)
• The lid stays locked. You must drain the
water to unlock the lid.
To drain the water refer to 'At the
end of the programme'.
Quick
With this option you can decrease the
programme duration.
Use this option for items with light soil or items
to refresh.
The related indicator comes on.
Prewash
With this option you can add a prewash phase
to a washing programme.
Use this option for heavy soil. When you set this
option the programme duration increases.
The related indicator comes on.
Easy Iron
The appliance carefully washes and spins the
laundry to prevent the creases.
The appliance decreases the spin speed, uses
more water and adapts the programme duration
to the type of laundry.
The related indicator comes on.
Remaining
moisture
(%)
150 53
138 53
0,48
www.zanussi.com
1)