Igniting And Setting The Burner - Candy PV 640 SN Gebrauchsanleitung

Each burner is fitted with automatic ignition. The ignition can be made with one hand,
while you have the pan in the other hand.
USE :
• Turn on the gas tap,
• A symbol next to each control knob
indicates which burner is lit.
(example: front left burner)
• Hob with automatic ignition integrated :
• Press and turn the knob to position " " keeping it pressed to produce sparks
which in turn ignite the burner.
• Hob with safety device
The thermocouple fast safety is a device allowing the automatic cut-out of the gas
supplying on the burner, in case the flame dies out accidentally.
• Press and turn the knob to position "high flame" keeping it pressed to
produce sparks which in turn ignite the burner.
Keep the pressure on the control knob a few seconds to permit the releasing of
the safety device.
• Set the flame according to your cooking requirements.
Intermediate positions are available between the settings on the control knob.
• To turn the flame out, turn the control knob back to stop position.
Please note :
. If there is a power cut, the burner can be ignited by pressing in and turning the knob to
position "high flame" and holding a naked flame to the burner.
Caution:
the heating surface clearly get hot while operating, so make sure that small children are
kept well away from the hob.
on the burner and automatic ignition integrated :
25