Inhaltsverzeichnis; Technical Specifications; Safety Instructions - Ferm TSM1030 Originalbetriebsanleitung

TABLE SAW
TSM1030
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the following text refer to the
pictures on page 2 - 5
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. Technical specifications
2. Safety instructions
3. Assembly instructions
4. Operation
5. Maintenance

1. TECHNICAL SPECIFICATIONS

Voltage
Frequency
Power input
No load speed
Max.cutting depth 90º
Max.cutting depth 45º
Saw blade dimensions
Number of teeth
Measurements of bench
Dust extraction outlet
Weight
Lpa (sound pressure level)
Lwa (sound power level)
Vibration
6
S6 (40%) This indicates that the machine has an
S6 continuous operation periodic duty typ - in an
operating cycle of 10 minutes, 4 minutes at rated
load and 6 minutes at no load.
Vibration level
The vibration emission level stated in this instruction
manual has been measured in accordance with
a standardised test given in EN61029; it may be
used to compare one tool with another and as a
preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level.
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Product information
Fig. A
1. Protective cap
2. Fence
3. Bench inlay
4. Mitre handle
5. Height handle
6. Measurement set-up for fence
7. On/off switch
8. Workbench
Check first whether or not the delivery has been
damaged by transport and/or whether all the
230 V~
parts are present.
50 Hz
1500 W (S6-40%)
5700/min

2. SAFETY INSTRUCTIONS

73 mm
60 mm
Explanation of symbols
250 x 30 x 2.8 mm
In this manual and/or on the machine the
T40
following symbols are used:
625 x 445 mm
40 mm
23 kg
93.4+3 dB(A)
106.4+3 dB(A)
<2.5 m/s2
Read the operating instructions carefully.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-