Storage
■
When you are not using the appliance, place it
on the cradle
.
■
You can store the crevice tool
nozzle
on the rear side of the cradle
in the holder for the brush nozzle
holder for the crevice tool
–
First, put the crevice tool
tool holder
so that the suction opening is
facing towards the cradle
–
Then fit the brush nozzle
nozzle holder
the crevice tool
Fig. 5
Fig. 6
SHSS 12 C2
and the brush
and the
.
onto the crevice
.
onto the brush
so that it cover the end of
(Fig. 5 and 6).
■
Store the appliance in a dust-free and dry location.
Troubleshooting
The appliance is not working.
■
The battery is not charged.
♦
Connect the appliance to the charger
■
The appliance is defective.
♦
Contact the Customer Service department.
The appliance is running but hardly
sucking up any dirt.
■
The battery is not sufficiently charged.
♦
Connect the appliance to the charger
■
The dirt container
♦
Empty the dirt container
■
The dust filter
is blocked.
♦
Clean the dust filter
The appliance will not charge.
■
The charger
is not correctly connected to
the socket/mains plug.
♦
Check the connections of the charger
■
The charger
is defective.
♦
Contact the Customer Service department.
Disposal
Disposal of the appliance
Under no circumstances should
you dispose of the appliance
in the normal domestic waste.
This product is subject to the
provisions of European
Directive 2012/19/EU.
Dispose of the appliance via an approved waste
disposal company or your municipal waste disposal
facility. Please observe applicable regulations.
Please contact your waste disposal facility if you
are in any doubt.
.
.
is full.
.
.
.
GB │ IE │ NI
│
9
■