Use And Handling Of The Cordless Electrical Power Tool - Parkside PAT 4 A1 Originalbetriebsanleitung

f) Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to bind and are easier
to control.
g) Use the power tool, accessories and tool bits, etc. in accord-
ance with these instructions, taking into account the working
conditions and the work to be performed. Use of the power
tool for operations different from those intended could result in a
hazardous situation.
5. Use and handling of the cordless electrical
power tool
a) Charge a rechargeable battery unit using only the charger
recommended by the manufacturer. Chargers are often de-
signed for a particular type of rechargeable battery unit. There is
the danger of fire if other types of rechargeable battery units are
used.
b) Only the rechargeable battery units supplied are to be used
with an electrical power tool. The use of other rechargeable bat-
tery units may lead to the danger of injury or fire.
c) When they are not being used, store rechargeable battery
units away from paperclips, coins, keys, nails, screws or other
small metal objects that could cause the contacts to be bridged.
Short-circuiting the contacts of a rechargeable battery unit may re-
sult in heat damage or fire.
d) Fluids may leak out of rechargeable battery units if they are
misused. If this happens, avoid contact with the fluid. If contact
occurs, flush the affected area with water. Seek additional
medical help if any of the fluid gets into your eyes. Escaping
battery fluid may cause skin irritation or burns.
│
■ 30 GB
PAT 4 A1