Operating Determinations - Omnitronic AR-212A Bedienungsanleitung

3. OPERATING DETERMINATIONS

This speaker system is an active system which can be used for permanent installations or for mobile use.
This product was designed for indoor use only and is allowed to be operated with an alternating current of
115/250 V AC, 50/60 Hz ~.
The given maximum power of the speaker system describes short-term peaks the system can handle as a
maximum. The correspondent RMS power is - as of all comparable systems (also from other manufacturers)
- significantly lower. The maximum power of the speaker system must never be exceeded. When operating
the speaker system, please make sure that the loudspeakers always sound well. When distortions can be
heard, either the amplifier or the loudspeaker is overloaded. Overloads can quickly lead to amplifier or
speaker damage. In order to avoid damage, please reduce the volume immediately when distortions can be
heard. When speaker systems are destroyed by overload, the guarantee becomes void.
By operating speaker systems with an amplifier, you can produce excessive sound pressure levels that may
lead to permanent hearing loss. Please refer to the explanations under "Legal instructions".
Speaker systems must only be operated by instructed persons.
Danger of Life due to crashing speaker systems or hearing loss due to excessive sound pressure
levels! The different local conditions have to be considered in terms of safety rules.
This speaker system must never be operated or stockpiled in surroundings where splash water, rain,
moisture or fog may harm the speaker system. When using smoke machines, make sure that the speaker
system is never exposed to the direct smoke jet and is installed in a distance of 0.5 meters between smoke
machine and speaker system.
The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation
(particularly in cars) and heaters. The relative humidity must not exceed 50 % with an ambient temperature
of 45° C. This device must only be operated in an altitude between -20 and 2000 m over NN.
This speaker system must only be installed at a solid, plane, anti-slip, vibration-free, oscillation-free and fire-
resistant location.
Please note: when using this speaker system in public or industrial areas, a series of safety instructions
have to be followed that this manual can only give in part. The operator must therefore inform himself on the
current safety instructions and consider them.
Before installing the system, make sure that the installation area can hold a minimum point load of 5 times
the system's load (e.g. weight 20 kg - point load 100 kg).
The speaker system must never be installed higher than 100 cm without secondary attachment.
Operate the speaker system only after having familiarized with its functions. Do not permit operation by
persons not qualified for operating the speaker system. Most damages are the result of unprofessional
operation!
This speaker system is not designed for road use. The speaker system is designed only for seldom
transports. When transporting this speaker system, it must be moved carefully and without force.
Speaker systems must never be transported with cranes.
Never use solvents or aggressive detergents in order to clean the speaker system! Rather use a soft and
damp cloth.
Please consider that unauthorized modifications on the speaker system are forbidden due to safety reasons!
If this speaker system will be operated in any way different to the one described in this manual, the product
may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to
dangers like crashes, hearing loss etc.
WARNING!
16/23 00074291.DOC, Version 1.0