Type Plate - Homa C270 WF Betriebsanleitung

3.3.1. Type plate

3.3.2. Motor
The motor consists of a stator and the motor shaft with the impeller assembly. The line for the power supply is
designed for maximum mechanical performance according to the characteristic line or the pump type plate. The
cable entry points and lines are water tight sealed from the pumped medium. The shaft bearing is done via a
robust, maintenance-free and lubricated roller bearing.
General Motor Data
Service Factor
Operating mode
Medium temperature:
Insulation class
Protection type
Standard cable length/sensor cable
Voltage
Warning of rotating impeller!
Do not touch the rotating impeller or reach through the pressure socket into the pump chamber!
During operation, never reach into the pump chamber or the rotating parts. Before maintenance or repair
work, switch off the machine and allow the rotating parts come to a halt!
Motor cooling
The cooling jacket with the overhead pressure connection provides sufficient motor cooling even in sipping mode.
3.3.3. Impeller
The impeller is mounted on the motor shaft and is driven by it. The impeller is an open multi-vane impeller, for
tainted fluids with fixed solids up to 2 mm.
No. Description
1 Type description
2 Serial number
3 Impeller diameter
4 Temperature of medium
5 Immersion depth
6 Weight
7 Hmax (delivery head max)
8 Hmin (delivery head min)
9 Qmax (delivery volume max)
10 Standard
11 Construction product
regulations-test lab
12a Year type test
12b Declaration of performance
13 Build year
14 Motor type
1.15
S3
35°C
F
IP68
10 m/0.5 m
230V / 1Ph / 50Hz
No. Description
15 IE Marking
16 Frequency
17 Voltage
18 Nominal current
19 Motor RPM
20 Power P1
21 Cos phi
22 Insulation class
23 Power P2
24 Start condenser
25 Operating condenser
26 Protection class
27 Operating class
28 Text field sales
29