Use Of Dishwasher Salt; Manual Adjustment; Electronic Adjustment - AEG FAVORIT ÖKOXL I Benutzerinformation

36

Use of dishwasher salt

Manual adjustment

Turn the water hardness dial to the position 1 or 2
(refer to the table).

Electronic adjustment

1. Activate the appliance.
2. Make sure that the appliance is in setting mode.
3. Press and hold the Delay touchpad and the Start touchpad at the same time until the
programme indicators AUTO, PRO and 30MIN flash.
4. Release the Delay touchpad and the Start touchpad.
5. Press the Program touchpad,
• The programme indicators PRO and 30MIN go off.
• The programme indicator AUTO continues to flash.
• The display shows the setting of the water softener (example:
6. Press the Program touchpad again and again to change the setting.
7. Deactivate the appliance to confirm.
If the water softener is set electronically to the level 1, the salt indicator light stays off.
USE OF DISHWASHER SALT
How to fill the salt container
1. Turn the cap counterclockwise and open
the salt container.
2. Fill the salt container with 1 litre of water
(only for the first time you fill with salt).
3. Use the funnel to fill the salt container
with salt.
4. Remove the salt around the opening of
the salt container.
5. Turn the cap clockwise to close the salt
container.
It is correct that water comes out from the
salt container when you fill it with salt.
= level 5).