8 After use
27
28
46
5. Then carefully pull the dust container to-
gether with the fitted on filter out of the ap-
pliance (Fig. 27).
NOTE:
Ensure that you firmly grasp both the dust
container and filter (Fig. 27). If you only
grasp the filter, there is danger that the dust
container will fall out and dust will escape.
6. Hold the dust container over a dustbin with
the filter inserted.
7. Only separate the dust container from the
filter over a dustbin (Fig. 28).
8. Tap lightly to knock out both parts
(Fig. 28) and remove coarser debris with
your hand.
9. If dust container and filter can no longer be
completely emptied/cleaned through this
measure, proceed as described under
Chapter 8.3, 'Cleaning dust container
and filter'.