Control Panel; Frostmatic Function; High Temperature Alarm; First Use - AEG Electrolux A63230GT Benutzerinformation

CONTROL PANEL

1 High temperature alarm light
2 Pilot light
3 FROSTMATIC light
4 FROSTMATIC switch
Alarm reset switch

FROSTMATIC function

You can activate the FROSTMATIC function by pressing the FROSTMATIC switch.
The FROSTMATIC light will light up.
This function stops automatically after 52 hours.
It is possible to deactivate the function at any time by pressing FROSTMATIC switch. The
FROSTMATIC light will switch off.

High temperature alarm

An increase in the temperature in the freezer (for example due to an power failure) is
indicated by:
• switching on of the Alarm light
• sounding of buzzer.
During the alarm phase, the buzzer can be switched off by pressing the Alarm reset switch.
During the alarm phase, don't place food inside the freezer.
When normal conditions are restored the Alarm light will switch off automatically.

FIRST USE

Cleaning the interior

Before using the appliance for the first time, wash the interior and all internal accesso-
ries with lukewarm water and some neutral soap so as to remove the typical smell of a
brand-new product, then dry thoroughly.
Do not use detergents or abrasive powders, as these will damage the finish.
1 2 3
Control panel
4
21