Control Panel; Frostmatic Function; High Temperature Alarm; First Use - AEG Electrolux A 40110 GT Benutzerinformation

CONTROL PANEL

1 Pilot light
2 High temperature alarm light
3 Frostmatic light
4 Frostmatic switch

Frostmatic function

You can activate the Frostmatic function by pressing the Frostmatic switch.
The Frostmatic light will light up.
It is possible to deactivate the function at any time by pressing Frostmatic switch. The
Frostmatic light will switch off.

High temperature alarm

An increase in the temperature in the freezer (for example due to an power failure) is
indicated by switching on of the Alarm light
During the alarm phase, don't place food inside the freezer.
When normal conditions are restored the Alarm light will switch off automatically.

FIRST USE

Cleaning the interior

Before using the appliance for the first time, wash the interior and all internal accesso-
ries with lukewarm water and some neutral soap so as to remove the typical smell of a
brand-new product, then dry thoroughly.
Do not use detergents or abrasive powders, as these will damage the finish.

DAILY USE

Freezing fresh food

The freezer compartment is suitable for freezing fresh food and storing frozen and deep-
frozen food for a long time.
To freeze fresh food activate the FROSTMATIC function at least 24 hours before placing
the food to be frozen in the freezer compartment.
1 2 3
Control panel
4
19