Changing The Volume Of The Ring Tone; Switching The Silent Mode On And Off - sks BS 2012 Bedienungsanleitung

SKS-Kinkel Elektronik GmbH
BS 2012 Audio receiver

Changing the volume of the ring tone

1.2
Keep the tone key pressed for some time to change the volume of the ring tone. The volume is
then changed successively. There are 5 possible settings and once the highest is reached the
process will go back to the first setting. To select a setting just release the key and this volume
will become the standard setting.

Switching the silent mode on and off

1.3
Press the button with the speaker key for about 5 seconds in order to mute the indoor station.
An acoustic signal will confirm that the process has been completed successfully. In addition,
the door open key will flash at one second intervals.
To deactivate the silent mode, press the speaker key again. An acoustic signal will confirm that
the process has been completed successfully.
Support-Hotline: +49 (0) 2661 98088 112
E-Mail: support@sks-kinkel.de
- 10 -
EN
Version: 1.0
Document art. no. 97011900