Tunturi Platinum Upright Bike Handbuch Seite 5

Step 3: Handlebar
1. Run the two hand pulse wires (26) into the hole in the
handle bar mounting plate and out through the hole
in the console plate. Install the Handle Bar (3) onto
the Upright tube (2) with two 5/16" x 5/8" Hex
Head bolts (51), two 5/16" x 18mm Flat Washers
(72) and two 5/16" Split Washers (103) being care-
ful not to pinch the hand pulse wires.
3.
Upright Bike
5