Troubleshooting - Brita PURITY C Quell ST Bedienungsanleitung

7 Repair
Regularly check the filter system for leaks. Regularly check the hoses for kinks.
Bent hoses must be replaced.
The complete filter system must be replaced in rotation after a maximum of ten years.
The hoses must be replaced in rotation after a maximum of five years.
Caution: Before replacing filter systems or hoses, read the technical data (Chapter 9) and the
!
operating and safety information (Chapter 3).
Regularly clean the outside of the filter system with a soft, damp cloth.
Caution: Do not use any abrasive chemicals, cleaning solutions or astringent cleaning agents.
!

8 Troubleshooting

8.1 No water flow
Cause: Water intake closed.
Troubleshooting: Open the water intake at the upstream stop valve or by closing the locking
handle
8.2 No or low water flow in spite of open water intake
Cause: Mains pressure too low.
Troubleshooting: Check mains pressure. If the fault persists, check the filter system and filter
cartridge and replace if necessary.
Cause: Filter head not mounted in direction of flow.
Troubleshooting: Dismantle filter head and install in direction of flow (Chapter 4).
8.3 Leak
Cause: Screwed connections not fitted correctly.
Troubleshooting: Check mains pressure. Check all screwed connections and mount according to
Chapter 4. If the fault persists, replace filter system.
on the filter head .
2 1
EN
21