6. Install:
Swingarm 1
G
Pivot shaft 2
G
Washer 3
G
Nut (pivot shaft) 4
G
NOTE:
Apply the molybdenum disulfide grease on
G
the pivot shaft.
5PA51820
Insert the pivot shaft from right side.
G
7. Check:
Swingarm side play a
G
Free play exists → Replace collars.
Swingarm up and down movement b
G
Unsmooth movement/binding/rough spots
→ Grease or replace bearings, bushings
and collars.
5PA51830
8. Install:
Washer 1
G
Bolt (rear shock absorber-relay arm) 2
G
NOTE:
Apply the molybdenum disulfide grease on
G
the bolt.
Insert the bolt from left side.
G
5PA51840
9. Install:
Bolt (connecting rod) 1
G
Nut (connecting rod) 2
G
NOTE:
Apply the molybdenum disulfide grease on the
bolt.
5PA51850
10. Install:
Drive chain support 1
G
Drive chain support cover 2
G
Bolt (drive chain support cover) 3
G
Nut (drive chain support cover) 4
G
Bolt (drive chain support) 5
G
Nut (drive chain support) 6
G
5PAR0026
5 - 57
CHAS
SWINGARM
63 Nm (6.3 m · kg, 45 ft · lb)
36 Nm (3.6 m · kg, 25 ft · lb)
53 Nm (5.3 m · kg, 38 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
16 Nm (1.6 m · kg, 11 ft · lb)