Dwt-Zelte Junior Air Anleitung Seite 12

Junior Air
Make sure that release valve
is mounted to pump as shown
on the picture. Do dot use any
other electrical aggregates with-
out release valve but the one
witch was delivered. The tubes
take maximum 0,5 bar / 7psi.
Tube pressure must not exeed
0,5 bar / 7psi!
Unscrew little cap on top of the
valves and start infalting the middle
section (s). Carry on with the other
tubes at the sides. Srew back the
little cap.
www.dwt-zelte.com