Description Of The Device; Features - Futurelight EYE-36 MK2 Bedienungsanleitung

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the
fixture.
For overhead use (mounting height >100 cm), always fix the fixture with an appropriate safety-rope. Fix the
safety-rope at the correct fixation points only. The safety-rope must never be fixed at the transport handles!
Only operate the fixture after having checked that the housing is firmly closed and all screws are tightly
fastened.
The maximum ambient temperature T = 45° C must never be exceeded.
a
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, crash etc.

DESCRIPTION OF THE DEVICE

Features

16 Bit LED Moving Head Wash with 1 W LEDs
• Equipped with 36 x 1 W LEDs: 12 x red, 12 x blue, 12 x green
• Stepless RGB colour changing
• Masterdimmer
• Strobe effect
• Built-in sequences
• Compact housing
• Positioning within 540° Pan and 270° Tilt
• Vector und tracking mode
• Advantages of LED-technology: extremely long life, low power consumption, minimal heat emission,
defacto maintenance free with brilliant light radiation
• Control-Board with 4-digit display for adjusting the DMX-starting address, Pan/Tilt-Reverse, Program,
Reset
• DMX-control via every standard DMX-controller
19/28 00039649.DOC, Version 1.2