Machine Information - Ferm MSM1031 Originalbetriebsanleitung

EN
RADIAL MITRE SAW
thank you for buying this ferm product.
By doing so you now have an excellent product,
delivered by one of European leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the text refer to the diagrams
on pages 2-3.
Read the operating instructions carefully
before using this device. Familiarize
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
intended use
The electro tool is intended as a stationary
machine for making straight lengthways and
crossways cuts in wood. Horizontal mitre angles
of -45° to +45° as well as vertical bevel angles of
-45° are possible.
Contents

1. Machine information

2. Safety
3. Mounting accessories
4. Operation
5. Service & Maintenance
1. Machine information
technical specification
Voltage
Capacity
Machine class
Revolutions, not under load
Saw blade measurement
Angle for mitring
Angle for bevelling
Mitre saw maximum sawing capacity:
Mitre 0º, Bevel 0º
4
Weight
Lpa (sound pressure)
Lwa (acoustic capacity)
Vibration level
S6 (25%) This indicates that the machine has an
S6 continuous operation periodic duty typ – in
an operating cycle of 10 minutes, 2,5 minutes at
rated load and 7,5 minutes at no load.
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned
-
-
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Features
Figs. 1, 2 and 3
1. On/off switch
3. Unlock button (Blade protective cover)
4. Cover carbon brush
5. Lock-pin
6. Blade protective cover
7. Workpiece clamp
8. Guide fence
230 V 9. Knob adjusting saw angle
S1:1200W 10. Locking knob
S6:1500W (25%) 11. Fixing knob clamp
II (double insulated) 12. Handle adjusting bevel angle
5000/min 13. Connection dust bag
210x30x2.6mm 14. Slide rail
45º (left and right) 15. Bevel angle
45º (only left) 16. Handle
17. Cover
65x300 mm 18. Saw blade bolt
Mitre 45º, Bevel 45º
Mitre 45º, Bevel 0º
Mitre 0º, Bevel 45º
using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
35x215 mm
65x215 mm
35x300 mm
12.0 kg
99.6 dB(A)
112.6 dB(A)
4.51 m/s
2