Auto Standby; Switching Between Auxiliary Connection And Fm Transmission - Alpine EZi-DAB-BT Bedienungsanleitung

Auto standby

By default, the receiver automatically goes into standby after four hours to save your vehicle's battery power. To change the auto
standby setting:
1. Press the button.
2. Turn and press the Select dial to choose 'SETTINGS' > 'AUTO STANDBY'.
3. Turn and press the Select dial to choose a standby time between 2 and 8 hours.

Switching between auxiliary connection and FM transmission

To change the way EZi-DAB-BT connects to your existing audio system:
1. Press the button.
2. Turn and press the Select dial to choose 'SETTINGS' > 'AUDIO OUT'.
3. Turn and press the Select dial to choose one of the following options:
FM TRANSMIT: Select this if you want EZi-DAB-BT to connect to your existing audio system using FM transmit. Turn and
press the Select dial again to choose the FM frequency that you want EZi-DAB-BT to use for transmitting to your audio
system.
Note: You may want to change the FM transmit frequency if you find it is interfering or using the same frequency as a
broadcast FM radio station.
LINE OUT: Select this if you want EZi-DAB-BT to connect to your existing audio system using the auxiliary input connection.
Turn and press the Select dial again to choose a 'GAIN' setting between 'NORMAL' (Default) and 'LOW'. Choose 'LOW' if the
audio sounds distorted. If you still experience problems, try using the 'FM TRANSMIT' option.
Note: For best performance, we recommend using the 'LINE OUT' option.
22