Technical Data
Petrol Lawnmower
Art. No ................................................................................ 95323
Contents ..............................................................99 cm
Power,
OHV 4-stroke motor .........................1,9 kW (2,6 PS)
Rated speed ................................................3000 min
Cutting width .................................................406 mm
Cutting depth ...........................................40 - 80 mm
Cutting height adjustment: ...........5 degrees (30/ca. 50/75 mm)
Collection bag capacity ....................................... 40 l
Fuel tank capacity ................................................. 0,8 l
Super/ Unleaded petrol/ E10
Weight ................................................................. 18,5 kg
Noise and Vibration Information
Sound pressure level L
Sound power level L
Wear ear protectors!
Vibration emission value a
h
1)
Measured according to
EN 836
WARNING: The vibration emission level will vary
because of the ways in which a power tool can be
used and may increase above the level given in this
information sheet.
The vibration emission level may be used to compare
one tool with another.
It may be used for a preliminary assessment of
exposure.
An accurate estimate of the vibratory load should also
take into account the times when the tool is shut
down or when it is running but not actually in use.
This may significantly reduce the vibratory load over
the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
Read and understand the
operating instructions before using
the appliance. Familiarise with the
control elements and how to use the appliance
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
parties.
The operator is responsible for accidents or risks to
third parties.
In case of any doubts about connection and operati-
on refer please to our customer center
Specified Conditions Of Use
The mower has been designed for cutting grass and
grass areas with a maximum climb of 20° in private
gardens around the house and in garden colonies.
Do not use this product in any other way as stated
ECO WHEELER 410 P 2
3
-1
1)
...................... 84,5 dB (A)
PA
2)
.............................96 dB (A)
WA
1)
................................2,48 m/s
2
2)
2000/14/EG
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.
Use the appliance only outside, never use it
in confined and bad ventilated areas.
The mower must not be used for cutting
bushes, hedges and thickets, for cutting and
mulching creepers or lawns on roofs or in
balcony boxes. The mower must also not be
used as a crusher for mulching tree cuttings and
hedges or levelling any terrain roughness.
Requirements for operating staff
Never let children work with the appliance. Never let
adults work with the appliance unless they have been
properly trained.
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Qualification: Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
Minimum age: Persons over 16 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
Local regulations may stipulate the minimum age of
the user.
Training: Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.
Emergency procedure
Danger of injury !
Never put your hands and feet near the rotating
parts. Keep a distance from the ejection opening
at all times.
Danger of burns !
Some parts of the appliance get too hot when the
appliance is operated. Do not touch any hot parts,
e.g. engine and muffler.
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with DIN 13164, a workplace
has to be fitted with a first-aid kit. It is essential to
replace any used material in the first-aid kit immedia-
tely after it has been used. If you seek help, state the
following pieces of information:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
ENGLISH
23