Important Components; Safety Regulations; Correct Use / Application - Solo Port 423 Gebrauchsanweisung Und Originalbetriebsanleitung

Important Components; Safety regulations
Fig. 1

4.1 Correct use / Application

This machine must only be used for the purpose of applying approved plant protection agents, pesticides,
insecticides, weed killer (herbicides) and liquid fertilizers available from authorised specialist dealers as
well as for the purpose of applying clean water
Observe all instructions provided by the spraying agent manufacturer.
We recommend using only spraying agents that have been approved for use as spraying agent for the
above mentioned areas of application by the relevant authorities in your country.
The pressure sprayer must not be used for any other purposes, e.g., for the spraying of liquid paint or
applying any other media than the above mentioned liquids!
Particularly, aggressive, acid- or solvent-containing liquids, disinfectants or impregnating agents and
flammable products must not be sprayed with this device!
Within certain limits, the amount to be applied is subject to the position of the spray tube. During
operation, if the spray tube is directed upwards at an angle of more than 30° to the horizontal, use the
liquid pump that is available as a special accessory.
According to its type designation, this equipment is suitable for:
Agriculture, horticulture, orchards, green spaces, vineyards, nurseries.
The mistblower may only be used for the jobs it has been designed for – and no other!
Always observe all safety hints while using the machine.
ENGLISH 4

3. Important Components

4. Safety regulations

1. Tank lid / Filler
basket with filter
2. Formula tank
3. Formula outlet
4. Spark plug
5. Carburetor
6. Muffler
7. Starter handle
8. Air filter
9. Fuel tank cap
10. Fuel tank cap
12. Shoulder strap
– quick coupling
13. Liquid tap
14. Spray tube
15. Spray nozzle
16. Dosage sleeve
17. Throttle lever
18. Fuel tap
20. Tank ventilation