First Use - Electrolux ESF 66811 Benutzerinformation

80 electrolux
Function buttons
The following functions can be set using
these buttons:
• setting the water softener level,
• cancelling a washing programme or a de-
lay start in progress,
• activation/deactivation of the Multitab
function,
• activation/deactivation of the rinse aid dis-
penser when Multitab function is active,
• activation/deactivation of the audible sig-
nals.
Programme-progress-display
The programme-progress-display is divided
in 5 LED lamps and shows:
• When the appliance is switched on. Press
the On/Off button, all 5 LED lamps come
on with a blue light.
• The progress of the washing programme.
Once the programme starts only the first
LED lamp is on. The other LED lamps will
come on gradually as the washing pro-
gramme runs. (The LED lamps come on
from left to right)
• The end of the washing programme. All 5
LED lamps come on with a green light
• A malfunction of the appliance. All 5 LED
lamps are flashing with a blue light
Setting mode
Press the On/Off button.
The appliance is in setting mode if:
• ALL programme button lights come on.
• Programme-progress-display is fully on
with a blue light.
When performing the following opera-
tions, the appliance must be in setting
mode:
– selecting a washing programme,
– setting the water softener level,
– activating/deactivating the rinse aid,
– activating/deactivating the audible
signals,
Press the On/Off button.
The last performed or selected programme
is still set if:

First use

Before using your dishwasher for the first
time:
• Only one programme button light comes
on.
• Programme-progress-display is partially
on with a blue light.
In this case, to return to setting mode, the
programme has to be cancelled.
To cancel a set programme or a pro-
gramme in progress
Simultaneously press and hold the 2 function
buttons B and C until all the programme but-
ton lights come on and the programme-pro-
gress-display is fully on with a blue light. The
programme has been cancelled and the ma-
chine is now in setting mode.
Audible signals
Audible signals have been introduced to help
indicate which operations the dishwasher is
performing:
– setting of the water softener,
– end of the washing programme,
– intervention of an alarm due to malfunction
of the machine.
Factory setting: audible signals activated
It is possible to deactivate the audible
signals.
Deactivation/activation of the audible
signals
1. Press the On/Off button. The dishwasher
must be in setting mode.
2. Simultaneously press and hold function
buttons B and C until the lights of function
buttons A, B and C start flashing.
3. Press function button C, the lights of
function buttons A and B go off while the
light of function button C continues to
flash. The digital display shows the cur-
rent level.
Audible signals deactivated
Audible signals activated
4. To change the setting, press function
button C again; the digital display shows
the new setting.
5. 5. To memorize the operation, switch off
the dishwasher.
• Ensure that the electrical and water con-
nections comply with the installation in-
structions