Cleaning And Maintenance - Bresser Temeo TB Bedienungsanleitung

MAIN STATION
measuring accuracy: 0,1° C/F (above -10° C/14° F);
1° C/F (below -10° C/14° F)
time signal: DCF
power supply: 4.5V, 300 mA via power plug (and 3V Lithium
button cell CR2032 as a low energy power supply)
REMOTE SENSOR
temperature measurement -20° C to 60° C (-4° F to 140° F)
range:
measuring accuracy: 0,1° C/F (above -10° C/14° F);
1° C/F (below -10° C/14° F)
Radio frequency: 433 MHz
Connectable sensors: up to 3
transmission range: max. 30 m
power supply: 3V via 2 x Alkaline batteries, AA size, 1.5V

CLEANING AND MAINTENANCE

Before cleaning the device, disconnect it from the power
supply (remove plug and remove batteries)!
Only use a dry cloth to clean the exterior of the device. To
avoid damaging the electronics, do not use any cleaning fluid.
Protect the device from dust and moisture. The batteries
should be removed from the unit if it has not been used for
a long time.
DISPOSAL
Dispose of the packaging materials properly, according to
their type, such as paper or cardboard. Contact your local
waste-disposal service
information on the proper disposal.
Do not dispose of electronic devices in the household
garbage!
As per Directive 2002/96/EC of the European Parliament on
waste electrical and electronic equipment and its adaptation
into German law, used electronic devices must be collected
separately and recycled in an environmentally friendly manner.
In accordance with the regulations concerning batteries
and rechargeable batteries, disposing of them in the
normal household waste is explicitly forbidden. Please make
sure to dispose of your used batteries as required by law — at
a local collection point or in the retail market. Disposal in
domestic waste violates the Battery Directive.
Batteries that contain toxins are marked with a sign and a
chemical symbol. "Cd" = cadmium, "Hg" = mercury, "Pb" =
lead.
or environmental authority
DE
GB
FR
IT
ES
for
19