G&D DVIMUX8-USB Bedienungs Und Installationsanleitung Handbuch Seite 57

The setup menu lists all KVM switch settings in tabular form:
Settings for DVIMUX8
Show System Info
Hotkey:
Double Hotkey:
Select Key:
Hotkey Delay:
Set System Defaults
Select Ch.1 after Power up:
Select Channel via Front Button:
Select Channel via Hotkey:
Select Channel via Step Key:
Service RS232 Bitrate:
Service RS232 Startup Mode: Setup Menu
PS/2 Scancode Set:
PS/2 Keyboard Type:
USB Keymode:
USB2.0 Function:
USB Pinning:
'Space': Toggle
The right column displays the active setting of the respective function.
Menu items with submenus containing more settings are indicated with three dots
(...) in the right column.
NOTE: The
Scan Code Set
of the KVM switch and are therefore not described in this manual.
How to operate the setup menu:
1. Use the Arrow or
The active entry is marked with angular  arrows .
2. Depending on the type of menu item, following action(s) can be carried out:
 Menu items whose settings are displayed in the right column can be changed
by pressing the
 A menu item that has a sub-dialogue available can be opened by pressing
NOTE: The following pages provide detailed information on how to change a cer-
tain function.
and
PS/2 Keyboard Type
Arrow keys to select the desired menu item.
key (repeatedly).
Space
...
Ctrl
No
1..8
Yes
...
No
Yes
Yes
9 | 0
115200
2
Standard
...
enabled
disabled
'S': Save
are only relevant for PS/2 variants
G&D DVIMUX8-USB · 17
Configuration
.
Enter