DeWalt D28011 Originalanweisungen Seite 39

Voltage
U.K. & Ireland only
Type
Power input
No-load/rated speed
Wheel diameter
Spindle diameter
Spindle length
Weight
* weight includes side handle and guard
L (sound pressure)
PA
K (sound pressure
PA
uncertainty)
L (sound power)
WA
K (sound power
WA
uncertainty)
Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a surface grinding
h
a =
h,AG
Uncertainty K =
Vibration emission value a disc sanding
h
a =
h,DS
Uncertainty K =
The vibration emission level given in this information
sheet has been measured in accordance with a
standardised test given in EN 60745 and may be
used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
WARNING: The declared vibration
emission level represents the main
applications of the tool. However if the
tool is used for different applications,
with different accessories or poorly
maintained, the vibration emission may
differ. This may significantly increase the
exposure level over the total working
period.
An estimation of the level of exposure to
vibration should also take into account
the times when the tool is switched off
or when it is running but not actually
doing the job. This may significantly
reduce the exposure level over the total
working period.
D28134
V 230
AC
V – 230/115
AC
4
W 1100
min -1 10500
mm 125
M14
mm 16
kg 2.2*
89
dB(A)
3.0
dB(A)
100
dB(A)
3.0
dB(A)
m/s² 8.5
m/s² 1.5
m/s² 3.5
m/s² 1.5
Fuses
Europe
U.K. & Ireland
Defi nitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
D28135 D28139 D28141
230 230 230
–
4 4
1400 850 1400
10500 10500 9000
125 125 150
M14 M14 M14
16 16
2.5* 2.1* 2.6*
91 89
3.0 3.0 3.0
102 100 102
3.0 3.0 3.0
8.0 8.0
1.5 1.5
≤ 2.5 ≤ 2.5 –
1.5 1.5 –
Identify additional safety measures to
protect the operator from the effects of
vibration such as: maintain the tool and
the accessories, keep the hands warm,
organisation of work patterns.
230 V tools
230 V tools
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
EN GL IS H
–
4
16
91
7.0
1.5
10 Amperes, mains
13 Amperes, in plugs
37