Advanced Operation; Lnb Settings; Diseqc Setting (General Setting) - Triax DVB 168S Bedienungsanleitung

DVB 168 S (GB)-15 050908
5. Antenna Positioner
1. Set-up Limit
2. Select Satellite
3. Select Transponder
4. Move East / West
5. Nudge East / West
6. Store Satellite
7. Recalculate Position

9. Advanced Operation

In this section some settings and operations are described that require certain expertise and basic
knowledge about satellite reception and digital TV for being carried out without fail. For most TV
viewers there should be no need to use, modify or adjust the items as described below.
In case of doubt please ask your dealer for support.

9.1 LNB Settings

This receiver has been factory-preset to the requirements of the most commonly used LNB types.
You can check or modify the actual settings in the menu "Installation", sub menu "Auto Search" or
"Manual Search". In case you wish to edit the parameters using the "Auto Search" sub menu, you
need to press the GREEN button first. These are the preset items:
These settings may need modifications if you use a specific LNB or a satellite antenna system that has
been installed with DiSEqC equipment (such as selector switches and / or motor antenna systems).
Please follow the instructions that come with this equipment or ask your dealer.

9.2 DiSEqC Setting (General Setting)

There is a DiSEqC option in the Main Menu. Please be sure to have selected the "DiSEqC 1.0" option as
long as you don't employ equipment according to "DiSEqC 1.2" or "USALS" standards. Changes can be
made using the buttons.
9.3 DiSEqC 1.0
In principle, there are two kinds of external DiSEqC switches on the market. One is for connection of
two LNBs, the other one is for connection of up to four LNBs. In the "Auto Search" sub menu you can
select the DiSEqC LNB input 1 / 2 / 3 or 4 for each LNB connected to the corresponding switch port of
the DiSEqC switch.
For details please follow the instructions that come with you DiSEqC equipment.
6. System Information
Software Update
LNB Local Freq.
DiSEqC
22 kHz
0 / 12 V Control
www.triax.com
7. Factory Preset
Universal
OFF
AUTO
0 V
15