KIDDY life pro Bedienungsanleitung Seite 25

Fig. 10
Fig. 11
Fig.12
When using the impact shield the diagonal belt is not fed
through the belt guide channel into the head rest (see fig. A
page 4)!
To enable the child better freedom of move-
ment the shoulder rests should be brought
into centre position (see item 4.2.1). Once
the child is seated, insert the impact shield
from both sides into the lap belt guide and
push it up to the child.
Pull the 3-point safety belt out and allow it to
lock in place. The buckle will make a clickin
noise. Feed the lap belt through the slots of
both outer, red guides of the impact shield.
Tighten the belt in the direction of the auto-
matic roll-up.
Then feed the shoulder belt through the gui-
des on the impact shield so that both belts
lay on top of each other in the impact shield
guides. Tighten the belt again.
11
ENG