Displaying/Resetting Maximum Value Storage; Displaying/Resetting Minimum Value Storage - Conrad 672861 Bedienungsanleitung

 Displaying/Resetting Maximum Value Storage
• Touch the display area „OUT TEMP" repeatedly until the temperature maximum (measured temperature, wind chill
temperature or dew point temperature) and the display „MAX" (to the left of the weather symbols) flash.
• To reset the maximum value storage, keep the display area „OUT TEMP" pushed for 3 seconds.

To get to the next subfunction (displaying/resetting the minimum value storage) -> touch the display area
„OUT TEMP" briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
 Displaying/Resetting Minimum Value Storage
• Touch the display area „OUT TEMP" repeatedly until the temperature minimum (measured temperature, wind chill
temperature or dew point temperature) and the display „MIN" (to the left of the weather symbols) flash.
• To reset the minimum value storage, keep the display area „OUT TEMP" pushed for 3 seconds.

To get back to the first subfunction (switching temperature display) -> touch the display area „OUT TEMP"
briefly 2x
Leaving setting mode -> touch the button „OUT TEMP" briefly 1x (or touch another display area wait for 30
seconds without touching the touch screen)
85