Herunterladen Inhalt Inhalt Diese Seite drucken

C) Function "Wind" (Symbol; Switching The Units For The Display Of The Wind Speed; Switching The Display Data; Viewing The Value Memory For The Wind Speed - Conrad TE831X Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

c) Function "Wind" (symbol "

In the basic display mode of the weather station, select the function "Wind" with the button " " (6) or
" " (7). The corresponding symbol (see above) blinks.
The following setting options and displays are available now:
 Switching the display data
Briefly press the button "SET" (5) repeatedly to switch between the following displays:
• Wind-chill factor (display "WIND CHILL"), wind direction display using the abbreviations of the points of the
compass (e.g. "NNE" for "NORTH-NORTH-EAST")
• Wind-chill factor (display "WIND CHILL"), wind direction indication in degrees (e.g. 22.5°)
• Temperature at the wind sensor, wind direction display using the abbreviations of the points of the compass (e.g.
"NNE" for "NORTH-NORTH-EAST")
• Temperature at the wind sensor, wind direction indication in degrees (e.g. 22.5°)
People sometimes perceive temperatures completely differently under certain circumstances than that
displayed by a thermometer. Especially in case of low outdoor temperatures, the temperature on naked
skin fells a lot colder the more the wind blows.
The "wind-chill" is a cooling effect defined for naked skin with a theoretical surface temperature of 33°C
and a wind speed of over 2.6m/s.
The higher the wind speed and the lower the actual ambient temperature, the more perceivable the
wind-chill effect.
 Switching the units for the display of the wind speed
Keep the button "SET" (5) depressed until the unit for the display of the wind speed changes. Release the button
again. Start again if you want to change the unit once again.
You can select between "km/h", "mph", "m/s" and "knots".
 Viewing the value memory for the wind speed
Briefly press the button "MEMORY" (3) repeatedly to switch between the following displays:
• Current wind speed
• Maximum wind speed today (display "DAILY MAX")
• Gust wind speed (display "GUST")
• Maximum gust wind speed today (display "GUST" and "DAILY MAX")
 Deleting the value memory for the wind speed
Keep the button "MEMORY" (3) depressed approx. 3 seconds to delete the value memories.
")
WIND
75

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis